Filter Systems

Metal Edge Filter

Removing the impurities particles on the filter element outside by mechanical scraping, it continuously filters on-line.DFX filter is designed for fine and accurate filtration ranging from 50-500micron. It can avoid extruding and breaking the impurities and is capable of the filtration for water and liquids of viscosity up to 800000cps. DFX filter is designed and manufactured per sinft’s high performance, high quality and high reliability standard. It is a world-class quality filter.
The conventional filters get clogged frequently when filtering the viscous liquid and removing the soft impurities. The customers have to select larger filters and clean the filter manually and frequently, which means expensive investment, hard work, valuable liquid loss. DFX filter solves these kinds of problems by its advanced self-cleaning. It always keeps the filter element clean, discharges waste liquid with high impurity concentration, reduces the liquid loss. When filtering the viscous liquids such as dirty water, adhesives, resins, polymers and oil, DFX filter works more efficiently. DFX filter is taking place fo vibrating screen, bag filter, basket filter and some kind of back-flushing filter by its technical advantages and low running cost.

Specifications:
 

Applicable Liquid

water and viscous liquids(<800000cps), impurity<1000ppm

Filtration Rating

50-500µm

Standard Design Pressure

1.0 MPa, high design pressure available

Design Temperature

0-200°C( determined by the seal material)

Filter Area Per Filter

0.11m²-1.36m²

Cleaning Differential Pressure

0.05MPa

Differential Pressure Instrument

differential pressure tansmitter(DPT) or diffential pressure switch(DPS)

Gear Motor

180w, three phase, 380V, protection class IP 55; worm reduction gear

Inlet and Outlet Standard

flange, HG20592-2009(DIN compatible), HG20615-2009(ANSI B16.5 Compatible)

Filter Element Type

V-SLOT slotted metal filter element, 316L material

Housing Wet Part Material

304/316L/CS

Scraping Blade Material

304/316L

Housing Seal Material

NBR/VITION(FKM)

Discharging Valve

Pneumatic ball valve, protection class IP65

Supply Facility Requirement

380V AC,0.4-0.6MPa clean and dry compressed air

Applications:
 

Applicable Industry: oil and fats, water treatment, pulp and paper, petro-chemical, fine chemical
Applicable Liquids: wax, kerosene, monomer, polymer, citric acid, fermented broth, cosmetics, silicon solution, soap, sorbitol, steriodsugar, wet end additives, adhesives, inks, lubricating oil, coatings, resin, rubber, ethanol, miscella, diesel, etc.

Fully automatic operation:

 Filtration usually takes place under pressure. The filter is cleaned after a programmed time or a preset number of cycles or according to the differential pressure. We recommend cleaning the system at approximately 4 times the initial differential pressure. The cleaning motor is operated for around 10 seconds (about three turns of the filter cartridge). This is sufficient to clean the filter thoroughly. The motor may need to run continuously in exceptional cases. The drive shaft is always turned clockwise. The drain valve is opened in order to empty the filter. Depending on the residue concentration, this can either take place synchronously with cleaning or be time or cycle controlled. The opening time of the drain valve can be set between 2 and 6 seconds. The filter can be emptied in suction mode using a buffer or by interrupting the filtration process.

Semi-automatic and manual operation are also possible.
 

1.POR Series Industrial Water Cleaning Systems With NBR / VITION Housing Seal Material
2.Self Cleaning Metal Edge Filter Pneumatic Ball Valve With V - Slot Series Filter Element
3.1.0 MPa Metal Edge Filter 1 - 800000 Viscosity For Decorating Coating Filtration
4.High Viscosity Automatic Self Cleaning Water Filters For Coatings / FCC Slurry Filtration
5.1.0MPa Self Cleaning Filter , Water Treatment Equipment For Cosmetics Filtration
6.IP65 Metal Edge Filter for fermented broth 0.11m² - 1.36m² Per Filter Area
7.Automatic Water Filter For Petrochemical Industry , High Efficiency Crude Oil Filtration
8.Viscous Liquids Metal Edge Filter Impurity < 1000ppm With Three Phase Gear Motor
9.0 - 200°C Metal Edge Filter IP65 For Automatic Oil Well Injection Filtration
10.Water Treatment Filters DFX Series , V - Slot Series Scraper Filter 50-500µM

 
 

Why People Choose Us

Hebei Sinft Filter Co., Ltd. is one of the leading manufacturers of industrial filters and accessories.

Address:

6th Building, Ruicheng City Plaza, Shijiazhuang, China

Email:

sft-sales4@sinftfilter.com

24/7 Supports (WhatsApp/Skype)

0086 15303112602

Request Free Consultation

Sinft needs to provide your name, whatsapp or email address. The specifications of purchased products are not limited to quantity, diameter, material, etc.