Sintered mesh

Plain weave sintered square woven wire mesh is made by sintering multiple layers of plain weave square woven mesh together,and its cross section structure as below picture. Because of the large open area percentages of the square woven wire mesh layers,this type of sintered wire mesh has good permeability characteristics and low resistance to flow. It can be designed with any numberand combination of square plain weave wire mesh layers to achieve particular flow and filtration characteristics. It is useful forpolymer production, as well as a variety of fluid and air filtration applications.

Another possibility with this type of stainless steel sintered wire mesh is the ability to sinter a large number of layers of square woven wire mesh together to form parts that are very thick and useful as flame and detonation arrestors. These laminates can be inches thick and still be made with high flow characteristics. Sintered mesh is also known as sintered wire cloth or sintered wire mesh laminate.
Specification we can manufacture list here:

• Filter Rating: 1 um - 200 um.
• Materials: SUS304 (AISI304), SUS316 (AISI316), SUS316L (AISI316L).
• Size: 300 × 1000 mm, 500 × 1000 mm, 600 × 1200 mm, 1000 × 1000 mm, 1200 × 1200 mm, 1000 × 1500 mm, 1200 × 1500 mm.

This type sinter mesh be cut and fabricated into various discs, tubes, filter cartridges, and flat panels.

Note: The porosity takes that of 20mesh as criteria, and other special structures can be manufactured.